White bathroom wall cabinet – This provides storage space without invading the bathroom space as much as wall-mounted cabinets. The installation of a built-in wardrobe requires that you cut into the wall of your bathroom to perform the installation, unless you are replacing an old built-in wardrobe the same size as the new one. You should also make sure the cabinet is firmly anchored to wooden boards within the wall; otherwise, the cabinet could fall later. Ideas for install white bathroom wall cabinet use a study finder to locate and mark the studs on the wall where you want to install the white cabinet.
Then for install white bathroom wall cabinet, measure the width of the box, and decide where to install the white cabinet so it is between the studs. Hold the cabinet against the wall while an assistant prints around the perimeter of the box on the wall. Remove the cabinet, and then cut it along the path with a spatula, creating a cutout on the wall. Measure and cut boards that fit in the space between the edges of the cutout and the back of the wall along the four sides of the opening. Slide the different pieces of wood into the interior space of the wall at the very edge of the opening.
Remove the screws that hold the cabinet door in place, and set the door aside. Insert the cabinet into the cutout of the wall, and drill holes through the sides, the bottom and top of the cabinet and into the wooden boards that you have installed on the wall. Screws for wood to drive through pilot holes that drilled, stopping once the heads of the screws are flush with the inside of the cabinet. Then for install white bathroom wall cabinet, replace the white cabinet door, and drive the screw through the hinge parts to hold the door in place.