Lowes Kitchen Cabinets – If you’re on a tight budget, but want to fix your kitchen, cupboard doors are a good starting point. Custom cabinets are expensive, but with a little knowledge, some materials, and elbow grease, you can update your doors from existing cabinets and make the room look new. Sometimes all that is required is to clean the cabinets and update the hardware. Remove the hinges and handles from existing cabinets with a screwdriver. Wash the cabinets with a mixture of dishwashing detergent and water. Choose a soap that cuts the fat. Allow drying. Return to place the hinges and handles with the new hardware.
A kitchen can also seem obsolete due to the color of the Lowes kitchen cabinets. Remove the doors from the cabinet, remove the hinges and handles from the doors and wash thoroughly to remove grease and dirt. Fill cracks and dents with putty. Sand the doors with an orbital sander and 100 grit sandpaper or sand hand using sanding pads. Remove the sanding dust from the door with an antistatic cloth. Prime the doors and let them dry completely. Painting the doors with oil-based paint, which is more durable than water-based paint and easier to clean. More than one layer may be necessary. Allow the paint to dry completely before adding another layer. Sand and paint the cabinets in the same way. When both are dry, hang the doors back in the cabinets.
As in painting, and the Lowes kitchen cabinets doors with an orbit sander and 100 grit sanding pads or using sanding. Use an antistatic cloth to remove sanding dust. Wipe over the stain with white, clean cloths. Use a small brush, such as those used to paint a picture, to enter corners. Cover all surfaces. Let the stain dry completely. This may take up to 24 hours. Brush in a transparent layer of varnish or polyurethane. Apply it in light layers and make sure each layer dries before applying the next. Before applying the last layer, light sand Hand the door with the grain. Use either sandpaper or a sanding pad, sanding until completely smooth. Use tack cloths to remove sanding dust and wipe with a clean cloth. Sand and stains from cupboards. Allow the finish to dry completely before hanging the doors.