Kitchen Cabinet Doors are a big investment, cabinet doors are relatively cheap and do not require a professional installation. If you have rudimentary woodworking skills, you can perform this task on your own. If your kitchen interior needs an upgrade or your cabinet looks a little tired, hanging new cabinet doors can give the whole room a quick face lift. Place the doors to be installed on a table. Identify the side of the doors where the hinges are to be attached. Measure 3 inches from the top of that side and draw a horizontal line with the pen. It is there on the upper hinge will rest.
Action 3 inches from the bottom of the page you selected in Step 1. Draw a horizontal line with your pen. It is there down in your lower hinge will rest. Hold the top hinge in place on the side of the Kitchen Cabinet Doors you selected. Make sure the top of the hinges is in line with the line drawn in step 1. Draw a circle through each screw hole to mark where you install the screws. Hold the lower hinge in place on the same side. Look down on the hinge is in line with the line you wrote in step 2. Draw a circle through each of the screw holes.
Drill holes through circles you have selected. If your 3/8 inch screws, drill holes just a bit bigger than that. Attach the upper hinges by screwing in the holes in the hinges on the cabinet door. Make sure the top of the hinges is aligned with the line you drawn in step 1. Raise the lower hinge with the line you drawn in step 2. Screw the lower hinge on each door tightly. Hold the Kitchen Cabinet Doors against the cabinet. Use a water pass to ensure that the top of the door is the level. Make a mark through the holes where the hinges are screwed into the cabinet.